ClearWeld is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and will fully cure overnight. With a tensile strength of 3200 PSI, ClearWeld sets to a hard, permanent bond.

INSTRUCTIONS

Prepare: Clean surface area of dirt, grease, oil, paint or loose debris.*
Mix: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

Apply: Apply with appropriate tool in an even coat, weld bead or extruded shape as needed.

Dry: Sets in 15 minutes. Cures in 30 minutes. If temperature is below 40ºF, then set time is longer.

* For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse sandpaper to provide the best repair.

Great for Tile Most Plastics Ceramic Glass Wood Metal.